Standing Seam - 1" Nail Strip Panel
-
Low-Profile Architectural Standing Seam Metal Roofing System
-
Ideal for residential and light commercial applications
-
Low-profile clipless system for fast, easy installation
-
Streamlined look for smaller roofing applications
1" Nail Strip Panel; max width 15.79"; Snap Lock Seam fastened
with #10-12 x 1" long No. 2 Phillips drive pancake head, wood
screws fastening metal to panel to min. 15/32" plywood decking;
maximum fastener spacing panel slots; Panel Rollformer: Schlebach
Quadro-Plus Rollformer; Maximum Allowable Roof Uplift Pressure
(steel): -59.75 psf Main Field @ 16" Fastener Spacing in Panel Slots;
-101.0 psf Perimeters @ 6-3/4" Fastener Spacing in Panel Slots;
-153.5 psf @ 6-3/4" Fastener Spacing in Panel Slots & 12 OC in Pan;
Oil Canning is a characteristic of light gauge architectural metals and
is not a fl aw and therefore is not a cause for rejection.
Specifications
Design Information
Test Report Summary
• Minimum Slope = 3":12"
• Actual Panel Width: 15.79” from 20" Coil
• Solid Substrate Required
• Architectural, Hydrokinetic Panel
• Snap Seam – No Field Seaming Required
• 24 and 26 Gauge Galvalume®
• 032" Aluminum
• 16oz Copper
• 30 Year Finish Warranty on Kynar 500 Finish
• Weather Tight Warranty Not Available
• Underlayment Required
• Clipless System limits panel length to 25' +/-
• Off set design ensures smooth surface at fabrication
• Florida Building Code 2020
• Chapter 15: Roof Assemblies
• Section 1504.3.2; 1505.3; 1507.4
• Chapter 16: Structural Design
• Chapter 22: Steel; Section 2209 Cold Form Steel
• Chapter 23: Wood
• Testing per TAS 125-03 Std. Requirements for
Metal Roof Systems
• Test Assembly #6 by Underwriters
Laboratory for:
a) UL 580-94, per FBC, Uplift Resistance of
Roof Assemblies
b) UL 1897-98, per FBC, Uplift Tests for Roof
Covering Systems
• FPA #9860.7 Non HVHZ – 24ga