Standing Seam - 1" Interlocking Flush Panel

1" Interlocking Flush Panel Standing Seam

Flush panel system designed for use in soffit, mansard, and wall applications
15-inch-wide flush panel system provides a smooth, flat surface to complement any architectural metal roofing system

1" Interlocking Flush Panel; max width 15.5"; concealed, interlocking
seams fastened with (2) #10-12 x 1" long No. 2 Phillips drive pancake
head, wood screws; fastening metal to panel to Wood or Steel
Substrate; maximum 12" fastener spacing; Panel Rollformer: Schlebach
Quadro-Plus Rollformer; Oil Canning is a characteristic of light gauge architectural metals and is not a flaw and therefore is not a cause for
rejection.

Download PDF Profile Sheet

Specifications

Design Information

Test Report Summary

• Vertical or Horizontal Application
• Actual Panel Width: 15.5" from 20" Coil
• Solid Substrate or Open Framing

• Architectural Soffit/wall panel

• Concealed Fastener Attachment – No Clip Required
• 24 and 26 Gauge Galvalume®
• .032" Aluminum
• 16oz Copper
• 30 Year Finish Warranty on Kynar 500 Finish
• Weather Tight Warranty Not Available
• Underlayment Not Required
• Vented or Non-Vented

• No Testing Performed