Standing Seam - 1½" Mechanical Lock Panel
-
Classic Architectural Standing Seam Metal Roofing System
-
Ideal for residential and light commercial applications
-
Specially designed clip allows thermal movement
-
Tested panel for rated assemblies achieves high performance levels
-
Mechanical locked seam for long-term weather tight performance
-
Excellent for roofi ng installation requiring exotic metals such as copper
1-1/2" Mechanical Lock Panel; max width 16.3"; Double Lock 180 Degree
Seam fastened with (2) #10-12 x 1" long No. 2 Phillips drive pancake
head, wood screws; Floating Clip Assembly ML150R Clip fastening
metal to panel to min. 15/32" plywood decking; maximum 24" clip
spacing; Panel Rollformer: Schlebach Quadro-Plus Rollformer;
Maximum Allowable Roof Uplift Pressure (steel): -59.75 psf Main Field
@ 24" Clip Spacing; Perimeter and Corner Pressure -123.5 psf @ 6"
Clip Spacing; Oil Canning is a characteristic of light gauge architectural
metals and is not a fl aw and therefore is not a cause for rejection.
Specifications
Design Information
Test Report Summary
• Minimum Slope = 1-1/2":12"
• Actual Panel Width: 16.3" from 20" Coil
• Solid Substrate Required
• Architectural, Hydrokinetic Panel
• Mechanically Seamed in the Field
• 24 and 26 Gauge Galvalume®
• .032" Aluminum
• 16oz Copper
• 30 Year Finish Warranty on Kynar 500 Finish
• Weather Tight Warranty Available
• Underlayment Required
• Miami Dade Building Code Compliance Approved
• Florida Building Code 2020
• Chapter 15: Roof Assemblies
• Section 1504.3.2; 1505.3; 1507.4
• Chapter 16: Structural Design
• Chapter 22: Steel; Section 2209 Cold Form Steel
• Chapter 23: Wood
• Testing per TAS 125-03 Std. Requirements for
Metal Roof Systems
• Test Assembly #6 by Underwriters
Laboratory for:
a) UL 580-94, per FBC, Uplift Resistance of
Roof Assemblies
b) UL 1897-98, per FBC, Uplift Tests for Roof
Covering Systems
• Testing per TAS 100 Wind Driven Rain Test
• FPA #9860.5 – HVHZ – 24ga
• FPA #15636.1 – HVHZ – .032" Aluminum
• M-D NOA #19-0722.03 - HVHZ - 24ga